5G NR RRC Timers

5G NR Quick Reference                            

Timers

Timer	Start	Stop	At expiry
T300	Upon transmission of RRCSetupRequest.	Upon reception of RRCSetup or RRCReject message, cell re-selection and upon abortion of connection establishment by upper layers.	Perform the actions as specified in 5.3.3.7.
T301	Upon transmission of RRCReestabilshmentRequest	Upon reception of RRCReestablishment or RRCSetupmessage as well as when the selected cell becomes unsuitable	Go to RRC_IDLE
T302	Upon reception of RRCReject while performing RRC connection establishment or resume, upon reception of RRCRelease with waitTime.	Upon entering RRC_CONNECTED or RRC_IDLE, upon cell re-selection and upon reception of RRCReject message.	Inform upper layers about barring alleviation as specified in 5.3.14.4
T304	Upon reception of RRCReconfiguration message including reconfigurationWithSync	Upon successful completion of random access on the corresponding SpCell For T304 of SCG, upon SCG release	For T304 of MCG, in case of the handover from NR or intra-NR handover, initiate the RRC re-establishment procedure; In case of handover to NR, perform the actions defined in the specifications applicable for the source RAT. For T304 of SCG, inform network about the reconfiguration with sync failure by initiating the SCG failure information procedure as specified in 5.7.3.
T310	Upon detecting physical layer problems for the SpCell i.e. upon receiving N310 consecutive out-of-sync indications from lower layers.	Upon receiving N311 consecutive in-sync indications from lower layers for the SpCell, upon receiving   RRCReconfiguration with reconfigurationWithSync for that cell group, and upon initiating the connection re-establishment procedure. Upon SCG release, if the T310 is kept in SCG.	If the T310 is kept in MCG: If AS security is not activated: go to RRC_IDLE else: initiate the connection re-establishment procedure. If the T310 is kept in SCG, Inform E-UTRAN/NR about the SCG radio link failure by initiating the SCG failure information procedure as specified in 5.7.3.
T311	Upon initiating the RRC connection re-establishment procedure	Upon selection of a suitable NR cell or a cell using another RAT.	Enter RRC_IDLE
T319	Upon transmission of RRCResumeRequestor RRCResumeRequest1.	Upon reception of RRCResume,RRCSetup, RRCRelease, RRCRelease with suspendConfig or RRCReject message, cell re-selection and upon abortion of   connection establishment by upper layers.	Perform the actions as specified in 5.3.13.5.
T320	Upon reception of t320 or upon cell (re)selection to NR from another RAT with validity time configured for dedicated priorities (in which case the remaining validity time is applied).	Upon entering RRC_CONNECTED, upon reception of RRCRelease, when PLMN selection is performed on request by NAS, when the UE enters RRC_IDLE from RRC_INACTIVE, or upon cell (re)selection to another RAT (in which case the timer is carried on to the other RAT).	Discard the cell reselection priority information provided by dedicated signalling.
T321	Upon receiving measConfig including a reportConfig with the purpose set to reportCGI	Upon acquiring the information needed to set all fields of cgi-info, upon receiving measConfig that includes removal of the reportConfig with the purpose set to reportCGI and upon detecting that a cell is not broadcasting SIB1.	Initiate the measurement reporting procedure, stop performing the related measurements.
T322	Upon receving measConfig including reportConfigNRwith the purpose set to reportSFTD and drx-SFTD-NeighMeas is set to true.	Upon acquiring the SFTD measurement results, upon receiving measConfig that includes removal of the reportConfig with the purpose   set to reportSFTD.	Initiate the measurement reporting procedure, stop performing the related measurements.
T325	Upon reception of RRCRelease message with deprioritisationTimer.		Stop deprioritisation of all frequencies or NR signalled by RRCRelease.
T342	Upon transmitting UEAssistanceInformation message with DelayBudgetReport.	Upon initiating the connection   re-establishment/resume procedures, and upon receiving delayBudgetReportingConfig set to release.	No action.
T345	Upon transmitting UEAssistanceInformationmessage with overheatingAssistance	Upon initiating the connection re-establishment procedure and upon initiating the connection resumption procedure	No action.
T380	Upon reception of t380 in RRCRelease.	Upon reception of RRCResume, RRCSetup or RRCRelease.	Perform the actions as specified in 5.3.13.
T390	When access attempt is barred at access barring check for an Access Category. The UE maintains one instance of this timer per Access Category.	Upon cell (re)selection, upon entering RRC_CONNECTED, upon reception of RRCReconfiguration including reconfigurationWithSync, upon change of PCell while in RRC_CONNECTED, upon reception of MobilityFromNRCommand, or upon reception of RRCRelease.	Perform the actions as specified in 5.3.14.4.

Note: Hope you find this information beneficial. If engaged, please share and do not forget to like to us.